J-ARM

Interface for Hands-Free Applications

J-Arm is the link between a night vision monocular and a head-gear or helmet mount of your choice. Made of hard-anodized aluminum, the J-Arm allows coarse and fine swivel/angle adjustments to ensure best fit.

PHG-7

Standard Non-Flip-Up Headgear (Bayonet)

PHG-7 is the head-mask for basic hands-free operations. With a built-in magnet, the PHG-7 automatically turns off the attached electro-optical unit (NV monocular or goggles) once removed from the headgear. PHG-7 comes with a set of 3 soft brow pads.

HM-714LP-SR

Low-Profile Flip-Up Helmet Mount

The HM-714LP-SR is the advanced solution for hands-free applications. The mount locks in upright position to protect an operator if an attached unit if the unit is bumped/impacted.

HMH-1

Advanced Helmet Mounting Harness

HMH-1 is the new helmet mounting harness designed for attaching and carrying multiple equipment on a standard ACH and similar brimless helmets. It features several different mounting points for an operator to carry night vision goggles, flashlights, microphones, cameras, battery packs, markers, map readers and other gear.

SL-3

3X Afocal Add-On Objective Lens

The Afocal Lens SL-3 is a great tool for instant increase of observation ranges for compatible night vision devices. Made of quality multi-coated glass the SL-3 attaches in seconds to the existing 1X lens by either snap-on or screw-in method.

SL-5

5X Afocal Add-On Objective Lens

The Afocal Lens SL-5 is a great tool for instant increase of observation ranges for compatible night vision devices. Made of quality multi-coated glass the SL-5 attaches in seconds to the existing 1X lens by either snap-on or screw-in method.

DQRM-14

Adjustable Dual Quick-Release Rifle Mount

The DQRM-14 is a great tool to convert your night vision monocular into a compact rifle sight.

The mount with two levers coupled to locking adjusters each allowing for fine tightness adjustments when locking to avoid any wobbling when mounting onto a rail/device.

MVP-240

Universal Multi-Voltage Battery Pack

The MVP-240 is the only battery pack on the market capable of supplying three different voltages to provide reliable and uninterrupted power to a wide variety of electronic and electro-optical systems. It is a universal powering tool for lengthy missions in remote locations where battery charging equipment is not accessible.

DB-14

Dual-Bridge Mount

The dual-bridge mount allows to connect two night vision monoculars together into a dual-tube binocular system to achieve depth perception. Compatible with bayonet head gears and helmet mounts.

NVR-714

Digital Recorder with Video Output

The NVR-714 is the add-on equipment that attaches to the eyepiece of a night vision device and records the scene as viewed by an operator: it records what you see. Video-output port allows to connect an external display for viewing the same NV image by two or more crew members.

HMD-800

Compact Head-Mounted Displays

HMD-800 Series are the ultra-portable display units that transmit real-time video signal from any primary electro-optical device. It helps you observe the surroundings without exposing yourself. It can also be used with a remote control so a user can have control over the system from distance.

TRC120

Universal Remote Control Unit

The universal remote control is designed to provide operational convenience for any GSCI-made thermal imaging or fusion system.

Lightweight and ergonomic, the TRC120 instantly paired to your  device as soon as you connect both with the cable. With identical, “no-confusion” connectors and cables you can control your device, feed its video signal to an external display or supply power from an external power source.

GS-EDVR

External Digital Video Recorder

DVR-576 is the standalone portable video recorder for any thermal or fusion system. Built-in LCD screen allows you to view recorded images and videos. The unit is compact, has simple user interface with multiple settings, long battery life. The set comes with cables for charging, video transmission, data transfer and a 32GB SD card.

GS-DVR-INT

Built-In Digital Video Recorder

DVR-INT is an optional feature for GSCI's thermal and fusion systems. A slot for microSD card is located in the battery compartment of a device which makes it fully protected in any environmental conditions. Recorder status is displayed on the screen of a thermal/fusion device. A 32GB microSD card and an SD adapter are included.

J-ARM

Interface for Hands-Free Applications

J-Arm is the link between the HMD-800 series and a head-hear or helmet mount of your choice. Made of hard-anodized aluminum, the J-Arm allows coarse and fine swivel/angle adjustments to ensure best fit.

J-ARM-TI

Interface for Hands-Free Applications

J-Arm-T is the link between the TI-GEAR-M monoculars with 25mm objective lenses or the DSQ-20 and a head-hear or a helmet mount of your choice. Made of hard-anodized aluminum, the J-Arm-T allows swivel/angle as well as resistance force / tightening adjustments adjustments to ensure best fit.

PHG-7

Standard Non-Flip-Up Headgear (Bayonet Only)

PHG-7 is the head-mask for basic hands-free operations. This accessory comes with a set of 3 soft brow pads.

HMH-1

Advanced Helmet Mounting Harness

HMH-1 is the new helmet mounting harness designed for attaching and carrying multiple equipment on a standard ACH and similar brimless helmets. It features several different mounting points for an operator to carry thermal / fusion goggles, flashlights, microphones, cameras, battery packs, markers, map readers and other gear.

COA

Clip-On Eyepiece for Rifle Sights

The Clip-On Eyepiece is the perfect tool to convert your existing thermal or fusion rifle sight to a clip-on sight for use with an existing daytime scope. Conversion takes only a few seconds. Outside thread is M52x0.75 which makes it suitable for a variety of standard clip-on adapters (also known as "clamps") to attach directly onto your daytime scope.

DLM

Dual-Lever Adjustable Rifle Mount (Picatinny)

Heavy Duty Rifle Mount

MAK-Picatinny is the robust rifle mount for attaching electro-optical systems onto Picatinny (MIL-STD-1913) rails.

Heavy Duty Rifle Mount

MAK-QR-Picatinny is the robust quick release rifle mount for attaching electro-optical systems onto Picatinny (MIL-STD-1913) rails.

MAK-QR-Blaser

Heavy Duty Rifle Mount

MAK BLASER QR is the quick-release rifle mount for attaching electro-optical system onto a BLASER rifle of your choice

DQRM

Adjustable Dual Quick-Release Rifle Mount

The DQRM is a great tool to convert your TI-GEAR thermal monocular into a compact rifle sight.

The mount with two levers coupled to locking adjusters each allowing for fine tightness adjustments when locking to avoid any wobbling when mounting onto a rail/device.

MVP-240

Universal Multi-Voltage Battery Pack

The MVP-240 is the only battery pack on the market capable of supplying three different voltages to provide reliable and uninterrupted power to a wide variety of electronic and electro-optical systems. It is a universal powering tool for lengthy missions in remote locations where battery charging equipment is not accessible.

IR-250S

Tactical Infrared Flashlight

The IR-250S achieves up to 250 meters of illumination distance in low-light conditions when used together with a fusion device in Night or Fusion-Night mode. The IR-250S can be used as a hand-held unit and can be attached to the Picatinny mount and used with the remote control.

J-ARM

Interface for Hands-Free Applications

J-Arm is the link between a night vision monocular and a head-gear or helmet mount of your choice. Made of hard-anodized aluminum, the J-Arm allows coarse and fine swivel/angle adjustments to ensure best fit.

PHG-7

Standard Non-Flip-Up Headgear (Bayonet)

PHG-7 is the head-mask for basic hands-free operations. With a built-in magnet, the PHG-7 automatically turns off the attached electro-optical unit (NV monocular or goggles) once removed from the headgear. PHG-7 comes with a set of 3 soft brow pads.

HM-714LP-SR

Low-Profile Flip-Up Helmet Mount

The HM-714LP-SR is the advanced solution for hands-free applications. The mount locks in upright position to protect an operator if an attached unit if the unit is bumped/impacted.

HMH-1

Advanced Helmet Mounting Harness

SL-3

3X Afocal Add-On Objective Lens

The Afocal Lens SL-3 is a great tool for instant increase of observation ranges for compatible night vision devices. Made of quality multi-coated glass the SL-3 attaches in seconds to the existing 1X lens by either snap-on or screw-in method.

DQRM-14

Adjustable Dual Quick-Release Rifle Mount

The DQRM-14 is a great tool to convert your night vision monocular into a compact rifle sight.

The mount with two levers coupled to locking adjusters each allowing for fine tightness adjustments when locking to avoid any wobbling when mounting onto a rail/device.

IR-250S

Tactical Infrared Flashlight

The IR-250S achieves up to 250 meters of illumination distance in low-light conditions when used together with a night vision device. The IR-250S can be used as a hand-held unit and can be attached to the Picatinny mount and used with the remote control.

DB-14

Dual-Bridge Mount

The dual-bridge mount allows to connect two night vision monoculars together into a dual-tube binocular system to achieve depth perception. Compatible with bayonet head gears and helmet mounts.

MVP-240

Universal Multi-Voltage Battery Pack

The MVP-240 is the only battery pack on the market capable of supplying three different voltages to provide reliable and uninterrupted power to a wide variety of electronic and electro-optical systems. It is a universal powering tool for lengthy missions in remote locations where battery charging equipment is not accessible.

NVR-714

Digital Recorder with Video Output

The NVR-714 is the add-on equipment that attaches to the eyepiece of a night vision device and records the scene as viewed by an operator: it records what you see. Video-output port allows to connect an external display for viewing the same NV image by two or more crew members.

HMD-800

Compact Head-Mounted Displays

HMD-800 Series are the ultra-portable display units that transmit real-time video signal from any primary electro-optical device. It helps you observe the surroundings without exposing yourself. It can also be used with a remote control so a user can have control over the system from distance.

GS-EDVR

External Digital Video Recorder

DVR-576 is the standalone portable video recorder for any thermal or fusion system. Built-in LCD screen allows you to view recorded images and videos. The unit is compact, has simple user interface with multiple settings, long battery life. The set comes with cables for charging as well as video transmission, data transfer and a 32GB SD card.

GS-DVR-INT

Built-In Digital Video Recorder

DVR-INT is an optional feature for GSCI's thermal and fusion systems. A slot for microSD card is located in the battery compartment of a device which makes it fully protected in any environmental conditions. Recorder status is displayed on the screen of a thermal/fusion device. A 32GB microSD card and an SD adapter are included.

J-ARM

Interface for Hands-Free Applications

J-Arm is the link between the HMD-800 series and a head-hear or helmet mount of your choice. Made of hard-anodized aluminum, the J-Arm allows coarse and fine swivel/angle adjustments to ensure best fit.

J-ARM-TI

Interface for Hands-Free Applications

J-Arm-T is the link between the TI-GEAR-M monoculars with 25mm objective lenses or the DSQ-20 and a head-hear or a helmet mount of your choice. Made of hard-anodized aluminum, the J-Arm-T allows swivel/angle as well as resistance force / tightness adjustments adjustments to ensure best fit.

PHG-7

Standard Non-Flip-Up Headgear (Bayonet Only)

PHG-7 is the head-mask for basic hands-free operations. This accessory comes with a set of 3 soft brow pads.

HM-714LP-SR

Advanced Low-Profile Flip-Up Helmet Mount

The HM-714LP-SR is the advanced solution for hands-free applications. The mount locks in upright position to protect an operator if an attached unit if the unit is bumped/impacted.

HMH-1

Advanced Helmet Mounting Harness

COA

Clip-On Eyepiece for Rifle Sights

The Clip-On Eyepiece is the perfect tool to convert your existing thermal or fusion rifle sight to a clip-on sight for use with an existing daytime scope. Conversion takes only a few seconds. Outside thread is M52x0.75 which makes it suitable for a variety of standard clip-on adapters (also known as "clamps") to attach directly onto your daytime scope.

DLM

Dual-Lever Adjustable Rifle Mount (Picatinny)

Heavy Duty Rifle Mount

MAK-Picatinny is the robust rifle mount for attaching electro-optical systems onto Picatinny (MIL-STD-1913) rails.

Heavy Duty Rifle Mount

MAK-QR-Picatinny is the robust quick release rifle mount for attaching electro-optical systems onto Picatinny (MIL-STD-1913) rails.

MAK-QR-Blaser

Heavy Duty Rifle Mount

MAK BLASER QR is the quick-release rifle mount for attaching electro-optical system onto a BLASER rifle of your choice

DQRM

Adjustable Dual Quick-Release Rifle Mount

The DQRM is a great tool to convert your TI-GEAR thermal monocular into a compact rifle sight.

The mount with two levers coupled to locking adjusters each allowing for fine tightness adjustments when locking to avoid any wobbling when mounting onto a rail/device.

MVP-240

Universal Multi-Voltage Battery Pack

The MVP-240 is the only battery pack on the market capable of supplying three different voltages to provide reliable and uninterrupted power to a wide variety of electronic and electro-optical systems. It is a universal powering tool for lengthy missions in remote locations where battery charging equipment is not accessible.

IR-250S

Tactical Infrared Flashlight

The IR-250S achieves up to 250 meters of illumination distance in low-light conditions when used together with a fusion device in Night or Fusion-Night mode. The IR-250S can be used as a hand-held unit and can be attached to the Picatinny mount and used with the remote control.

J-ARM

Interface for Hands-Free Applications

J-Arm is the link between a night vision monocular and a head-gear or helmet mount of your choice. Made of hard-anodized aluminum, the J-Arm allows coarse and fine swivel/angle adjustments to ensure best fit.

PHG-7

Standard Non-Flip-Up Headgear (Bayonet)

PHG-7 is the head-mask for basic hands-free operations. With a built-in magnet, the PHG-7 automatically turns off the attached electro-optical unit (NV monocular or goggles) once removed from the headgear. PHG-7 comes with a set of 3 soft brow pads.

HM-714LP-SR

Low-Profile Flip-Up Helmet Mount

HMH-1

Advanced Helmet Mounting Harness

SL-3

3X Afocal Add-On Objective Lens

SL-5

5X Afocal Add-On Objective Lens

DQRM-14

Adjustable Dual Quick-Release Rifle Mount

The DQRM-14 is a great tool to convert your night vision monocular into a compact rifle sight.

The mount with two levers coupled to locking adjusters each allowing for fine tightness adjustments when locking to avoid any wobbling when mounting onto a rail/device.

MVP-240

Universal Multi-Voltage Battery Pack

The MVP-240 is the only battery pack on the market capable of supplying three different voltages to provide reliable and uninterrupted power to a wide variety of electronic and electro-optical systems. It is a universal powering tool for lengthy missions in remote locations where battery charging equipment is not accessible.

DB-14

Dual-Bridge Mount

The dual-bridge mount allows to connect two night vision monoculars together into a dual-tube binocular system to achieve depth perception. Compatible with bayonet head gears and helmet mounts.

NVR-714

Digital Recorder with Video Output

The NVR-714 is the add-on equipment that attaches to the eyepiece of a night vision device and records the scene as viewed by an operator: it records what you see. Video-output port allows to connect an external display for viewing the same NV image by two or more crew members.

HMD-800

Compact Head-Mounted Displays

HMD-800 Series are the ultra-portable display units that transmit real-time video signal from any primary electro-optical device. It helps you observe the surroundings without exposing yourself. It can also be used with a remote control so a user can have control over the system from distance.

TRC120

Universal Remote Control Unit

The universal remote control is designed to provide operational convenience for any GSCI-made thermal imaging or fusion system.

Lightweight and ergonomic, the TRC120 instantly paired to your  device as soon as you connect both with the cable. With identical, “no-confusion” connectors and cables you can control your device, feed its video signal to an external display or supply power from an external power source.

GS-EDVR

External Digital Video Recorder

DVR-576 is the standalone portable video recorder for any thermal or fusion system. Built-in LCD screen allows you to view recorded images and videos. The unit is compact, has simple user interface with multiple settings, long battery life. The set comes with cables for charging as well as video transmission, data transfer and a 32GB SD card.

GS-DVR-INT

Built-In Digital Video Recorder

DVR-INT is an optional feature for GSCI's thermal and fusion systems. A slot for microSD card is located in the battery compartment of a device which makes it fully protected in any environmental conditions. Recorder status is displayed on the screen of a thermal/fusion device. A 32GB microSD card and an SD adapter are included.

J-ARM

Interface for Hands-Free Applications

J-Arm is the link between a night vision monocular and a head-gear or helmet mount of your choice. Made of hard-anodized aluminum, the J-Arm allows coarse and fine swivel/angle adjustments to ensure best fit.

J-ARM-TI

Interface for Hands-Free Applications

J-Arm-T is the link between the TI-GEAR-M monoculars with 25mm objective lenses or the DSQ-20 and a head-hear or a helmet mount of your choice. Made of hard-anodized aluminum, the J-Arm-T allows swivel/angle as well as resistance force / tightness adjustments adjustments to ensure best fit.

PHG-7

Standard Non-Flip-Up Headgear (Bayonet)

PHG-7 is the head-mask for basic hands-free operations. With a built-in magnet, the PHG-7 automatically turns off the attached electro-optical unit (NV monocular or goggles) once removed from the headgear. PHG-7 comes with a set of 3 soft brow pads.

HMH-1

Advanced Helmet Mounting Harness

COA

Clip-On Eyepiece for Rifle Sights

The Clip-On Eyepiece is the perfect tool to convert your existing thermal or fusion rifle sight to a clip-on sight for use with an existing daytime scope. Conversion takes only a few seconds. Outside thread is M52x0.75 which makes it suitable for a variety of standard clip-on adapters (also known as "clamps") to attach directly onto your daytime scope.

DLM

Dual-Lever Adjustable Rifle Mount (Picatinny)

The new Dual-Lever Mount (DLM) is the Quick Release rifle mount with adjustable levers to ensure precise fit regardless of the state or tolerances of your Picatinny (MIL-STD-1913) rail. Made of hard-anodized aluminum, this rugged mount is the essential accessory for your device.

MAK-Picatinny

Heavy Duty Rifle Mount

MAK-QR-Picatinny

Heavy Duty Rifle Mount

MAK-QR-Blaser

Heavy Duty Rifle Mount

DQRM

Adjustable Dual Quick-Release Rifle Mount

The DQRM is a great tool to convert your TI-GEAR thermal monocular into a compact rifle sight.

The mount with two levers coupled to locking adjusters each allowing for fine tightness adjustments when locking to avoid any wobbling when mounting onto a rail/device.

IR-250S

Tactical Infrared Flashlight

The IR-250S achieves up to 250 meters of illumination distance in low-light conditions when used together with a night vision device. The IR-250S can be used as a hand-held unit and can be attached to the Picatinny mount and used with the remote control.

MVP-240

Universal Multi-Voltage Battery Pack

The MVP-240 is the only battery pack on the market capable of supplying three different voltages to provide reliable and uninterrupted power to a wide variety of electronic and electro-optical systems. It is a universal powering tool for lengthy missions in remote locations where battery charging equipment is not accessible.